770-255-1313
24hr Emergency Service
770-255-1313
24hr Emergency Service
Multi-Craft Services
Bulk Material Services
Mechanical Services
Multi-Craft Services
Bulk Material Services
Mechanical Services

CHIMNEY MASONRY REPAIR & TENSION BAND COATING

Hospitals & Schools

WORK PERFORMED

  • Brickwork crack repairs & masonry repointing
  • Cleaning, sealing & coating of steel tension bands
  • Lightning protection downlead repairs
  • Cleaning & coating of steel platform members
  • Installation of self-closing platform safety gates
  • Mortar water table reconstruction
  • Removal of accumulated ash & interior debris

SUMMARY

Industrial Access performed comprehensive maintenance and repairs on two brick chimneys at a medical facility. Both structures exhibited masonry deterioration and surface corrosion, while additional deficiencies included damaged lightning protection connections and unprotected platform ladder access points. Repairs included masonry restoration and repointing, cleaning and protective coating of steel tension bands and platform members, lightning protection downlead repairs, installation of self-closing safety gates, and reconstruction of a deteriorated mortar water table to help preserve structural integrity and improve safety.

TIME

Project completed in 2 weeks

COST

Repairs completed during a scheduled outage

SAFETY

No reported safety incidents

CLIENT NEED

A medical facility in the midwestern US required maintenance and repairs on their two 205-foot-tall powerhouse brick chimneys to address deteriorating masonry, surface corrosion, and safety concerns. The North Chimney, measuring 20 ft in diameter with an interior brick liner, exhibited oxidation on its upper steel tension bands, damaged brickwork along the southwest face, and a stray rope wrapped around the chimney top. The South Chimney, measuring 10 ft in diameter with a steel liner and exterior steel platforms, required more extensive repairs due to deteriorated mortar joints, corroded tension bands and platform members, and separated lightning protection (LPS) downleads. Additional deficiencies included damaged mortar above the breeching duct opening, unprotected platform ladder access points, and accumulated ash and debris at the chimney's interior base. These conditions highlighted the need for targeted masonry restoration, corrosion protection, and safety improvements to preserve the integrity of both structures and support their continued operation.

ACCESS

To complete repairs on both chimneys, IA technicians utilized a crane-suspended man basket and existing platforms to access work areas at-height, including the upper tension bands and chimney top. IA crews are experts at handling access at elevated work environments that require careful coordination to carry out comprehensive repairs across the full length of a chimney stack.

SOLUTION

IA began the project by addressing the exterior deterioration on the North Chimney. The upper three most degraded steel tension bands were tool-cleaned to remove loose material and surface oxidation, followed by the application of a waterproof sealant and a protective coating to help prevent further corrosion. A stray rope wrapped around the top of the chimney was also removed. IA then repaired approximately 25 ft of damaged brickwork by grinding out the existing cracks, removing loose material, and applying fresh repair mortar to restore the deteriorated masonry.

IA continued onto the South Chimney, where repairs included restoring separated LPS downlead connections and addressing deteriorated exterior masonry. Damaged mortar joints and cracks were ground out, cleaned, and repointed with fresh mortar across approximately 75 sq ft of the chimney exterior. The four steel tension bands were also tool-cleaned to remove surface oxidation, coated for corrosion protection, and resealed along their edges to help prevent moisture intrusion.

Additional repairs on the South Chimney included rebuilding approximately 25 sq ft of the deteriorated mortar water table above the breeching duct opening to improve water drainage and protect the surrounding brickwork. Oxidized steel platform members were cleaned and treated with a galvanizing coating, while self-closing safety gates were installed at platform ladder access points where they were missing. IA also removed accumulated ash and loose debris from the chimney's interior base.

RESULTS

All repairs were successfully completed on both chimneys, addressing areas of masonry deterioration, surface corrosion, and safety concerns. Left unaddressed, deteriorated mortar joints and cracked brickwork can allow moisture to penetrate the masonry, accelerating deterioration and potentially compromising structural stability over time. Similarly, cleaning, coating, and resealing the steel tension bands and platform members provided renewed corrosion protection, helping prevent further metal deterioration and preserve the condition of these critical components. Together, all completed improvements addressed existing deficiencies before they could develop into more extensive structural and safety concerns, helping prevent costly future repairs and unplanned maintenance. Regular inspections and proactive maintenance remain essential to identifying early signs of deterioration and supporting the long-term reliability of industrial masonry chimneys.

For additional information about our company and services we provide, please give us a call anytime

770-255-1313
Call Now Button